Ring Size Chart

The most common ring size is 6 to 7 for women and 9 to 10 for men, but an average is not a measurement. To find your own size, measure the inside diameter of a ring that already fits and read it off the chart below, or measure your finger with a strip of paper. Most Shop QSE rings are made in US sizes 6 to 10, and selected designs run from 4.25 to 12 including half sizes.

Ring sizes we make

Sizes 6, 7, 8, 9 and 10 are made across the range and carry almost all of our stock. Beyond those five, availability is per design rather than across the board:

  • Band and eternity rings are the widest range — 4.25, 5, 5.5, 6, 6.5, 7, 8, 8.5, 9, 10, 11, 11.5 and 12.
  • Solitaire and engagement rings add 5, 5.25, 5.5, 5.75 and 11 on selected designs.
  • Half sizes exist at 6.5, 7.5, 8.5, 9.5 and 10.5 on some designs, and not on others.

The size dropdown on the design you are looking at is the authority. If a size is listed there, we make it; if it is not, we do not. Where your size is not offered on a particular design, order the next size up rather than down — a ring slightly loose can be worn, one slightly tight will not pass the knuckle.

US size Inside diameter Inside circumference Circumference (inches)
6 16.5 mm 51.9 mm 2.04"
7 17.3 mm 54.4 mm 2.14"
8 18.1 mm 57.0 mm 2.24"
9 18.9 mm 59.5 mm 2.34"
10 19.8 mm 62.1 mm 2.44"

What a ring size actually measures

A ring size is a measurement of the band, not of your finger directly. The US scale describes the inside diameter of the ring — the distance straight across the hole — and each whole size adds roughly 0.8 mm to it. The European scale describes the inside circumference instead, which is why European sizes look like much larger numbers for the same ring.

This is worth knowing because the two home methods below measure different things. Measuring a ring you own gives you a diameter. Measuring your finger gives you a circumference. Both appear in the charts on this page, so either will lead you to the right size.

How to measure your ring size at home

Two methods work without any special equipment. The second is the more reliable of the two, because a solid ring cannot stretch.

Method 1 — measure your finger

  1. Cut a strip of paper about 5 mm wide, or take a length of non-stretch string.
  2. Wrap it around the base of the finger, snug against the skin but not pressing in.
  3. Mark where the strip overlaps itself.
  4. Lay it flat against a ruler and read the length in millimeters.

That figure is your finger circumference. Measure three times and use the largest reading — paper stretches slightly and string sags, and both errors make the ring come out too small.

Method 2 — measure a ring that fits

  1. Choose a ring worn on the same finger of the same hand.
  2. Lay it flat on a ruler marked in millimeters.
  3. Measure straight across the inside of the band, from inner edge to inner edge.

That figure is the inside diameter. Match it to the diameter column in the chart above.

International ring size conversion

Ring sizes are numbered differently in each market. The European number is the inside circumference in millimeters, which is why it matches the last column. Sizes marked ✓ are the ones we make.

US & Canada UK & Australia Europe Inside diameter Inside circumference
3 F 44 14.1 mm 44.2 mm
4 H½ 47 14.9 mm 46.8 mm
5 J½ 49 15.7 mm 49.3 mm
6 ✓ L½ 52 16.5 mm 51.9 mm
7 ✓ N½ 54 17.3 mm 54.4 mm
8 ✓ P½ 57 18.1 mm 57.0 mm
9 ✓ R½ 60 18.9 mm 59.5 mm
10 ✓ T½ 62 19.8 mm 62.1 mm
11 V½ 65 20.6 mm 64.6 mm
12 X½ 67 21.4 mm 67.2 mm
13 Z½ 70 22.2 mm 69.7 mm

If you are between two sizes

Order the larger size. This matters more at Shop QSE than at a jeweller who resizes, because we make whole sizes only and we do not resize rings after purchase. A ring that is slightly loose can be worn, and sits comfortably in cold weather when fingers shrink. A ring that is slightly tight will not pass the knuckle, which makes it unwearable rather than merely imperfect.

If you measure at 6.5, order a 7. If you measure at 8.5, order a 9.

When to size up

  • Wide bands. A band wider than about 6 mm covers more of the finger and feels tighter at the same size. Add a quarter to a half size — and on band rings, where half sizes are stocked, that half size is usually available.
  • Larger knuckles. If the knuckle is noticeably wider than the base of the finger, size to clear the knuckle and accept a little movement at the base.
  • Cold hands. Fingers can change by close to a full size between a cold morning and a warm evening. Measure warm.

Common mistakes

  • Measuring first thing in the morning, or with cold hands, when fingers are at their smallest.
  • Pulling the paper strip tight instead of resting it against the skin.
  • Using a ring worn on a different finger — the two are rarely the same size.
  • Guessing a partner's size from their glove size or their height. Borrow a ring instead.

If the size is wrong

Rings are not resized after purchase. Each ring is made and finished to its stated size, and altering the band would affect the setting and the certification of the stones.

Please use the chart above before ordering. If the size turns out to be wrong, we can exchange the ring for the correct size, subject to our exchange policy. Custom and engraved rings are made for you and cannot be returned, so take particular care with sizing before ordering one.

Common questions

What is the average ring size?

In the United States the most common ring size is 6 to 7 for women and 9 to 10 for men. Those are averages, not predictions — measure before you order.

What ring sizes does Shop QSE make?

Sizes 6, 7, 8, 9 and 10 are made across the range. Band and eternity rings go from 4.25 to 12 including half sizes, and selected solitaires are made in 5, 5.25, 5.5, 5.75 and 11. The size dropdown on each design shows exactly what is made for it.

How do I measure my ring size without a ring sizer?

Wrap a strip of paper or a length of string around the base of your finger, mark where it overlaps, lay it flat against a ruler and read the length in millimeters. That length is your finger circumference — match it to the chart above.

How do I measure my ring size using a ring I already own?

Lay the ring on a ruler and measure straight across the inside of the band, from inner edge to inner edge. That figure is the inside diameter in millimeters, which the chart converts to a US size.

I am between two ring sizes. Which should I order?

Order the larger of the two. A ring slightly too large can still be worn and sits comfortably; one slightly too small will not pass the knuckle at all. If the design you want does not offer your half size, round up.

Should I size up for a wide band?

Yes. A wide band covers more of the finger and feels tighter than a thin one at the same size. Add a quarter to a half size for bands wider than about 6 mm; our band and eternity rings stock half sizes, so that adjustment is usually orderable.

Does Shop QSE make half ring sizes?

On some designs. Band and eternity rings are stocked at 6.5, 8.5 and 11.5, and selected solitaires at 5.25, 5.5 and 5.75. Half sizes are not offered on every design, so check the size dropdown on the one you want.

Does finger size change during the day?

Yes. Fingers swell in heat, after exercise and late in the day, and shrink when cold. Measure at the end of a normal day at room temperature, when your hands are at their largest.

How can I find out someone's ring size without asking?

Borrow a ring they already wear on the same finger and measure its inside diameter against the chart above. A ring worn on a different finger will not give the right answer.

What if my knuckle is larger than the base of my finger?

Measure both the knuckle and the base and choose a size between the two. The ring has to pass the knuckle, but it should not spin freely once it is on.

Can a Shop QSE ring be resized after purchase?

No. Rings are not resized after purchase. If the size is wrong we can exchange the ring for the correct size, subject to our exchange policy. Custom and engraved rings are made for you and cannot be returned, so measure carefully before ordering one.

Related guides